Ice O Matic Ice Maker EMF 450 Series User Manual

EMF 450 Series

Flake ICE Maker

✓

Produces up to 552 lbs. (251 Kgs.)* of ICE per day

Constructed from sturdy, corrosion-resistant

300 series stainless steel

✓

Only 16 inches wide

Available with an air-or water-cooled condenser

EMF 450 on a B55 Bin

ICE-O-Matic is the Best ICE Making Solution for:

Hard Water, Food Safety and Tight Spaces

Problem

Solution

Maximum ICE

Tight-Fitting Spaces

Maximum ICE production in a minimum amount of space:

Kitchen space utilization

• No additional side clearance required on a

30 inch wide bin

• Maximum ICE production in a 16 inch wide cabinet

• Works on all industry dispensers and bins

Poor Ice Quality

Dependable ICE

Ice is too wet and soft

ICE-O-Matic Flake ICE Makers remove excess water by

pushing the flaked ICE through an extrusion process.

The result is high quality flaked ICE which is ideal for

medical, supermaket or restaurant applications.

Operating Environments

ICE-O-Matic Tough

Built to last?

Constructed with a brass evaporator and rugged stainless

steel transport system enclosed in polyurethane insulation

Filter-Free Air

Dirty Air Filter

No air filter to change

Forget to change the air filter?

*Rated at 70 ° (21°) Air / 50° (10°) Water