Addonics Technologies Computer Drive AEPDDESU User Manual

T E C H N O L O G I E S

User Guide

Pocket eSATA/USB DigiDrive

(AEPDDESU, AEPDDESUWP, AEPDDESUWP-X)

v7.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

II.

Setting up the device in USB Mode

a. Attach mini USB cable from eSATA / USB

DigiDrive to USB port on PC.

b. The drive icon appears only when flash media is

inside the eSATA / USB DigiDrive.The drive icon

will disappear and reappear during media change.

Note for AEPDDESUWP: If an unformatted flash

media is use, no drive icon will show up in My

Computer.

Note for AEPDDESUWP-X: If an unformatted flash

media is use, no drive icon will show up in My

Computer.

Media Priority

When more than one media is inside the eSATA / USB

DigiDrive during bootup, the media that gets detected

first is according to the priority shown below

1. Compact Flash

2. Smart Media / xD Picture card

3. MMC / SD

4. Memory Stick

Note: If both eSATA and USB cables are plug-

in, the eSATA connection takes priority.

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Phone:

Fax:

408-573-8580

408-573-8588

Email: